2013, THE NETHERLANDS, WATER FOR INJECTION COOLER
- Home
- /
- 2013, THE NETHERLANDS, WATER FOR INJECTION COOLER
03/07/2013
- 265 kW Pre-Cooler. Cooling 3.000 kg/h WFI from 90°C down to 20°C.
- Heat exchanger multitubular ITMf type. Double tube sheet to avoid crossed contamination for Pharmaceutical applications.
- Design according to ASME BPE.
- RA ≤ 0,5 µm for wetted parts.
- Designed to be sanitized inside the inner tubes with steam.
- Fully manufactured in SS 316L.
- 3 units interconnected by 180° bends.
- Mounted on frame. Horizontal disposition.
- Design Pressure 10 bar.
- Design Temperature 180°C.
- 165 kW Cooler. Cooling 3.000 kg/h WFI from 90°C down to 20°C.
- Heat exchanger multitubular ITMf type. Double tube sheet to avoid crossed contamination for Pharmaceutical applications.
- Design according to ASME BPE.
- RA ≤ 0,5 µm for wetted parts.
- Designed to be sanitized inside the inner tubes with steam.
- Fully manufactured in SS 316L.
- 3 units interconnected by 180° bends.
- Mounted on frame. Horizontal disposition.
- Design Pressure 10 bar.
- Design Temperature 180°C.
- 55 kW Post-Cooler. Cooling 3.000 kg/h WFI from 20°C down to4°C using Ethylen Glycol at -15°C.
- Heat exchanger multitubular ITMf type. Double tube sheet to avoid crossed contamination for Pharmaceutical applications.
- Design according to ASME BPE.
- RA ≤ 0,5 µm for wetted parts.
- Designed to be sanitized inside the inner tubes with steam.
- Fully manufactured in SS 316L.
- 2 units interconnected by 180° bends.
- Mounted on frame. Horizontal disposition.
- Design Pressure 10 bar.
- Design Temperature 180°C.
- Location: The Netherlands.